Mobile column lift
| Technical data | Information || —- | —– |Load support | Adjustable wheel forks 155R13 – 13R 22.5, Ø 550 – 1140mm| Length of lifting fork 385 mm, suitable for super singles Lifting stroke | 1750mm Speed | Up 70 sec., Down 60 sec.
| Slow speed for fine positioning| Soft start with continuous increase of speedOperation | Up / Down from each column| Operation modes: All / Single| Interconnecting cables from column to column around the vehicle in a circuit with one open end to drive-in/out| Interconnecting cable per slave column, plugs on both ends, length 10 m| Power supply cable 10 m at master column| Max. 24 columns per lift set (4 master, 20 slave columns) Display indication | LCD display at master column, optional at slave columns| Active columns within lift set| Active operation mode| Height in „mm“Control | Smooth synchronization without abrupt speed variations, height tolerance of max. 2mm
| Continuous monitoring of all operational functions
| Control voltage 24V DCDrive | Electro-hydraulic| Motor 2.2 KW per column| Hydraulic cylinder self-lubricating, cylinder rod encased by steel tube| Proportional valves for smooth control without any incrementsConnection | 400 V / 3 Ph / 50 Hz, fuse 35 A (per master column) Positioning wheels | Rear: wheel jack, spring-loaded, with locking brake| Front: Retractable spring-loaded front wheels for minimum floor pressure.
Dimensions | 1150 x 1130 x 2255mm (l x w x h) per column.
Weight | 540 kg per column Protection class .
IP 65 Safety features.
Double load securing with hydraulic and mechanical locks.
Hydraulic pressure relief valve preventing overload. Main switch lockable, with emergency stop at each column Safety standards | CE, EN 1493