FINKBEINER EHB807V11
Specifications
Model | EHB807V11 |
---|
Information
Technical data | Information |
---|---|
Load support | Adjustable wheel forks 155R13 - 13R 22.5, Ø 550 - 1140 mm |
| Length of lifting fork 385 mm, suitable for super singles
Lifting stroke | 1750 mm
Speed | Up 70 sec., Down 60 sec.
| Slow speed for fine positioning
| Soft start with continuous increase of speed
Operation | Up / Down from each column
| Operation modes: All / Single
| Interconnecting cables from column to column around the vehicle in a circuit with one open end to drive-in/out
| Interconnecting cable per slave column, plugs on both ends, length 10 m
| Power supply cable 10 m at master column
| Max. 24 columns per lift set (4 master, 20 slave columns)
Display indication | LCD display at master column, optional at slave columns
| Active columns within lift set
| Active operation mode
| Height in „mm“
Control | Smooth synchronisation without abrupt speed variations, height tolerance of max. 2 mm
| Continuous monitoring of all operational functions
| Control voltage 24V DC
Drive | Electro-hydraulic
| Motor 2.2 KW per column
| Hydraulic cylinder self-lubricating, cylinder rod encased by steel tube
| Proportional valves for smooth control without any increments
Connection | 400 V / 3 Ph / 50 Hz, fuse 35 A (per master column)
Positioning wheels | Rear: wheel jack, spring-loaded, with locking brake
| Front: Retractable spring-loaded front wheels for minimum floor pressure
Dimensions | 1150 x 1130 x 2255 mm (l x w x h) per column
Weight | 540 kg per column
Protection class | IP 65
Safety features | Double load securing with hydraulic and mechanical locks
| Hydraulic pressure relief valve preventing overload
| Main switch lockable, with emergency stop at each column
Safety standards | CE, EN 1493